FIELDS OF WORK: Medium flow rates and medium to high pressures. TYPE OF ROTARY: Backward blades with cover. APPLICATIONS: Suction and transport of clean air. Suitable for conveying solids mixed with air, chips and sawdust with fan not traversed by material.
• Esecuzioni costruttive standard
Es.1-Es.4-Es.5-Es.8-Es.9-Es.12
• Temperature del fluido standard
-10÷+60°C. Per altre temperature es.speciali a richiesta
• Tipo di costruzione
Ventilatore in lamiera di Fe360, girante in Fe360 equilibrata staticamente
e dinamicamente.
• Costruzione in AISI e ATEX a richiesta
• Dati di funzionamento
Condizioni dell’aria all’aspirazione T=20°C, 0m.s.l.m. e ρ=1.205 kg/m3.
• Rumorosità
Espressa in Pressione sonora LpA [dB(A)] rilevataA 1.5 MT, campo libero, 1/2 sferico, canalizzazione impiantistica <1MM)
TOLLERANZA
+- 3dB(A)
Accessories
- Cerebro and/or Easy series electrical panel - Gravity damper
- Anti-vibration joint on suction/premise port
- Manual calibration damper
- Dapo valve
- Bell vibration dampers
Technical characteristics
kW
15
Voltage
3PH
Current (A)
25,8
Polarity or No. turns at 1'
Poles 2
Type of controller
QE CEREBRO/EASY
Dimensions
B x D x H (mm)
997X913X960
Mouth Pressing base "b"
361
Mouth Pressing height "h"
507
Air passage "D" diameter mm
505
Flange "D1" hole spacing mm
551
External flange "D2" diameter mm
585
Weight KG
199
CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding.
The reported data meet the following parameters:
- Tolerance on flow rate ±5%
- Noise tolerance +3dB(A)
- Air temperature 15°C
- Barometric pressure 760 mm Hg
- Air specific gravity 1.226 kg/m³
- Frequency 50 Hz
Sound pressure level was measured by omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards.
Data Sheet
MAIN FEATURES
TECHNICAL FEATURES
DIMENSIONS
Accessories
"CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding. The data shown comply with the following parameters: Flow rate tolerance ±5% | Noise tolerance +3dB(A) | Air temperature 15°C | Barometric pressure 760 mm Hg | Air specific gravity 1.226 Kg/m³ | Frequency 50 Hz The sound pressure level was measured with omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards."
• Esecuzioni costruttive standard
Es.1-Es.4-Es.5-Es.8-Es.9-Es.12
• Temperature del fluido standard
-10÷+60°C. Per altre temperature es.speciali a richiesta
• Tipo di costruzione
Ventilatore in lamiera di Fe360, girante in Fe360 equilibrata staticamente
e dinamicamente.
• Costruzione in AISI e ATEX a richiesta
• Dati di funzionamento
Condizioni dell’aria all’aspirazione T=20°C, 0m.s.l.m. e ρ=1.205 kg/m3.
• Rumorosità
Espressa in Pressione sonora LpA [dB(A)] rilevataA 1.5 MT, campo libero, 1/2 sferico, canalizzazione impiantistica <1MM)
TOLLERANZA
+- 3dB(A)
FIELDS OF WORK: Medium flow rates and medium to high pressures. TYPE OF ROTARY: Backward blades with cover. APPLICATIONS: Suction and transport of clean air. Suitable for conveying solids mixed with air, chips and sawdust with fan not traversed by material.
- Cerebro and/or Easy series electrical panel - Gravity damper
- Anti-vibration joint on suction/premise port
- Manual calibration damper
- Dapo valve
- Bell vibration dampers
