AXIAL TURRET TE

TE716

The TE series is used wherever large volumes of air need to be extracted with rooftop applications in the absence of ductwork. The construction of this series, equipped with UNEL-MEC motors, ensures long-term robustness and reliability, allowing for eventual replacement or repair of the motors, all of which are unified and built to international standards.
Operating temperature : -25°C/+40C°

Data sheet

Key Features

  • Drum with double edge with large radius of curvature and support base made of sheet steel, painted with baked epoxy-polyester powders
  • Protective cap made of weather-resistant technopolymer
  • Weather-protected outer steel rod safety net in accordance with UNI EN 294 standard
  • Impeller with technopolymer blades (standard) and aluminum hub, statically and dynamically balanced in accordance with UNI ISO 1940/BS 6861/1 standard with variable shrinkage angle from stationary
  • Three-phase or single-phase asynchronous motor, EEF 1 and 2 efficiency, suitable for operation by speed regulation, IP 55 protection, class F insulation, S1 service, execution 4, conforms to IEC/EEC specifications (UNEL -MEC)

On request:

  • TE INOX - Version with stainless steel taburo.
  • TE ALL. - Version with aluminum drum
  • TE 2V - Version with three-phase double speed TE INV motorisation. - Reverse flow inlet version
  • TE REV - Version with reversible flow

IMPORTANT: In the absence of a gravity damper, the impeller-side safety net will be fitted as standard to meet current accident prevention regulations

Accessories

- Cerebro and/or Easy series electrical panel
- Speed controller (single-phase)
- Suction gravity damper
- Wall-mounted sub-base
- Silencer in suction
- support base for corrugated cover

Technical characteristics

kW

0,75

Voltage

3PH

Current (A)

2,2

Polarity or No. turns at 1'

6

Type of controller

QE Cerebro / Easy

Dimensions

B x D x H (mm)

930x930X500

Hole spacing "B x B" (mm)

870X870

No. of holes x mm

NO.4X10MM

Air passage "D" diameter mm

710

Weight KG

63

CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding.

The reported data meet the following parameters:

  • - Tolerance on flow rate ±5%
  • - Noise tolerance +3dB(A)
  • - Air temperature 15°C
  • - Barometric pressure 760 mm Hg
  • - Air specific gravity 1.226 kg/m³
  • - Frequency 50 Hz

Sound pressure level was measured by omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards.

Can't find what you're looking for?

Cta Aspirator