The ideal use of the PL series is in conveying corrosive fluids, even with high concentrations of moisture. This series allows 12 orientation positions (8 clockwise RD and 8 counterclockwise LG), defined by looking at the fan from the motor side. Suitable for conveying clean, nonabrasive air at a maximum temperature of 60°C
High-efficiency backward-bladed impeller made of polypropylene with aluminum hub protected from the conveyed fluid
Chair made of epoxy-polyester powder-coated sheet steel
Three-phase or single-phase asynchronous motor, efficiency IE2_IE3_IE4, also suitable for operation by speed regulation, protection IP 55 insulation class F, service S1, execution 5, conforms to IEC / EEC specifications
Accessories
- Cerebro and/or Easy series switchboard
Technical characteristics
kW
0,12
Voltage
3PH
Current (A)
0,45
Polarity or No. turns at 1'
Poles 4
Type of controller
QE Cerebro/Easy
1PH Regulator
Dimensions
B x D x H (mm)
453x430x400
Air passage "D" diameter mm
200
Weight KG
18
CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding.
The reported data meet the following parameters:
- Tolerance on flow rate ±5%
- Noise tolerance +3dB(A)
- Air temperature 15°C
- Barometric pressure 760 mm Hg
- Air specific gravity 1.226 kg/m³
- Frequency 50 Hz
Sound pressure level was measured by omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards.
Data Sheet
MAIN FEATURES
TECHNICAL FEATURES
DIMENSIONS
Accessories
"CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding. The data shown comply with the following parameters: Flow rate tolerance ±5% | Noise tolerance +3dB(A) | Air temperature 15°C | Barometric pressure 760 mm Hg | Air specific gravity 1.226 Kg/m³ | Frequency 50 Hz The sound pressure level was measured with omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards."
High-efficiency backward-bladed impeller made of polypropylene with aluminum hub protected from the conveyed fluid
Chair made of epoxy-polyester powder-coated sheet steel
Three-phase or single-phase asynchronous motor, efficiency IE2_IE3_IE4, also suitable for operation by speed regulation, protection IP 55 insulation class F, service S1, execution 5, conforms to IEC / EEC specifications
The ideal use of the PL series is in conveying corrosive fluids, even with high concentrations of moisture. This series allows 12 orientation positions (8 clockwise RD and 8 counterclockwise LG), defined by looking at the fan from the motor side. Suitable for conveying clean, nonabrasive air at a maximum temperature of 60°C
