- The MiniCastle Plug Fan series is particularly suitable for all suction systems where very low sound levels are required in the use of double inlet centrifugal fans - Suitable for conveying clean air at the maximum temperature of 40°C - Equipped with IEC motor directly coupled to the impeller, 4 Poles (1,400 rpm), 6 Poles (900 rpm) - Mounted motors are asynchronous or the new motors with permanent magnets power supply 230V 50Hz - 230/400V 50Hz class F/B
Self-supporting flat galvanized sheet metal frame and internal vibration dampers
Flat galvanized sheet metal paneling with laser/plasma cutting with microperforated inner nets
Fully recyclable internal aphonization made of thermobonded polyester fibers with reaction to fire "Class 1 (UNI 9177:1987) Euroclass B s1 d0" and smoke "F1 (AFNOR NF F16-101:1988)" certified with 20 mm thick aluminum protective foil
Double inspection door
Accessories
Cerebro and/or Easy series switchboard
Rain canopy
Wolf's mouth with anti-volatile net
Technical characteristics
kW
0,37
Voltage
3PH/1PH
Current (A)
1,11/2,4
Polarity or No. turns at 1'
Poles 4
Type of controller
QE Cerebro/Easy
1PH Regulator
Dimensions
B x D x H (mm)
700X700X700
Air passage "D" diameter mm
360X8
Flange "D1" hole spacing mm
405
External flange "D2" diameter mm
440
Weight KG
45
CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding.
The reported data meet the following parameters:
- Tolerance on flow rate ±5%
- Noise tolerance +3dB(A)
- Air temperature 15°C
- Barometric pressure 760 mm Hg
- Air specific gravity 1.226 kg/m³
- Frequency 50 Hz
Sound pressure level was measured by omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards.
Data Sheet
MAIN FEATURES
TECHNICAL FEATURES
DIMENSIONS
Accessories
"CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding. The data shown comply with the following parameters: Flow rate tolerance ±5% | Noise tolerance +3dB(A) | Air temperature 15°C | Barometric pressure 760 mm Hg | Air specific gravity 1.226 Kg/m³ | Frequency 50 Hz The sound pressure level was measured with omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards."
Self-supporting flat galvanized sheet metal frame and internal vibration dampers
Flat galvanized sheet metal paneling with laser/plasma cutting with microperforated inner nets
Fully recyclable internal aphonization made of thermobonded polyester fibers with reaction to fire "Class 1 (UNI 9177:1987) Euroclass B s1 d0" and smoke "F1 (AFNOR NF F16-101:1988)" certified with 20 mm thick aluminum protective foil
Double inspection door
- The MiniCastle Plug Fan series is particularly suitable for all suction systems where very low sound levels are required in the use of double inlet centrifugal fans - Suitable for conveying clean air at the maximum temperature of 40°C - Equipped with IEC motor directly coupled to the impeller, 4 Poles (1,400 rpm), 6 Poles (900 rpm) - Mounted motors are asynchronous or the new motors with permanent magnets power supply 230V 50Hz - 230/400V 50Hz class F/B
