FIELDS OF WORK: Small-medium-high flow rates. Medium pressures. TYPE OF TURN: Curved, reverse, (negative). APPLICATIONS: For pneumatic conveying, fumes, fi ni dust. Suitable for conveying solids mixed with air, shavings and sawdust with untraversed fan.
Standard construction executions Ex.1-Es.4-Es.5-Es.8-Es.9-Es.12
Standard fluid temperatures 10÷+60°C. For other temperatures ex.special on request
Type of construction
Fe360 sheet metal fan, Fe360 impeller statically and dynamically balanced.
AISI and ATEX construction on request
Operating data
Intake air conditions T=20°C, 0m.s.l.m. and ρ=1.205 kg/m3.
Rumorosità Espressa in Pressione sonora LpA [dB(A)] rilevataA 1.5 MT, campo libero, 1/2 sferico, canalizzazione impiantistica <1MM)
TOLERANCE +- 3dB(A)
Accessories
- Cerebro and/or Easy series electrical panel - Gravity damper
- Anti-vibration joint on suction/premise port
- Manual calibration damper
- Dapo valve
- Bell antivibration
Technical characteristics
kW
37
Voltage
3PH
Current (A)
63
Polarity or No. turns at 1'
Poles 2
Type of controller
QE CEREBRO/EASY
Dimensions
B x D x H (mm)
1420X1049X1170
Mouth Pressing base "b"
322
Mouth Pressing height "h"
453
Air passage "D" diameter mm
455
Flange "D1" hole spacing mm
497
External flange "D2" diameter mm
535
Weight KG
492
CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding.
The reported data meet the following parameters:
- Tolerance on flow rate ±5%
- Noise tolerance +3dB(A)
- Air temperature 15°C
- Barometric pressure 760 mm Hg
- Air specific gravity 1.226 kg/m³
- Frequency 50 Hz
Sound pressure level was measured by omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards.
Data Sheet
MAIN FEATURES
TECHNICAL FEATURES
DIMENSIONS
Accessories
"CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding. The data shown comply with the following parameters: Flow rate tolerance ±5% | Noise tolerance +3dB(A) | Air temperature 15°C | Barometric pressure 760 mm Hg | Air specific gravity 1.226 Kg/m³ | Frequency 50 Hz The sound pressure level was measured with omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards."
Standard construction executions Ex.1-Es.4-Es.5-Es.8-Es.9-Es.12
Standard fluid temperatures 10÷+60°C. For other temperatures ex.special on request
Type of construction
Fe360 sheet metal fan, Fe360 impeller statically and dynamically balanced.
AISI and ATEX construction on request
Operating data
Intake air conditions T=20°C, 0m.s.l.m. and ρ=1.205 kg/m3.
Rumorosità Espressa in Pressione sonora LpA [dB(A)] rilevataA 1.5 MT, campo libero, 1/2 sferico, canalizzazione impiantistica <1MM)
TOLERANCE +- 3dB(A)
FIELDS OF WORK: Small-medium-high flow rates. Medium pressures. TYPE OF TURN: Curved, reverse, (negative). APPLICATIONS: For pneumatic conveying, fumes, fi ni dust. Suitable for conveying solids mixed with air, shavings and sawdust with untraversed fan.
- Cerebro and/or Easy series electrical panel - Gravity damper
- Anti-vibration joint on suction/premise port
- Manual calibration damper
- Dapo valve
- Bell antivibration
