Home " Products " GF0310
Gf series

GF0310

FIELDS OF WORK: Small-medium-high flow rates. Medium pressures.
TYPE OF TURN: Curved, inverted, (negative).
APPLICATIONS: For suction and conveyance of clean or dusty air, even containing sawdust, various shavings, granular materials in low quantities, excluding filamentous materials.

Data sheet
Send request

Key Features

• Esecuzioni costruttive standard
Es.1-Es.4-Es.5-Es.8-Es.9-Es.12
• Temperature del fluido standard
-10÷+60°C. Per altre temperature es.speciali a richiesta
• Tipo di costruzione
Ventilatore in lamiera di Fe360, girante in Fe360 equilibrata staticamente
e dinamicamente.
• Costruzione in AISI e ATEX a richiesta
• Dati di funzionamento
Condizioni dell’aria all’aspirazione T=20°C, 0m.s.l.m. e ρ=1.205 kg/m3.
• Rumorosità
Espressa in Pressione sonora LpA [dB(A)] rilevataA 1.5 MT, campo libero, 1/2 sferico, canalizzazione impiantistica <1MM)
TOLLERANZA
+- 3dB(A)

Accessories

- Cerebro and/or Easy series electrical panel - Gravity damper
- Anti-vibration joint on suction/premise port
- Manual calibration damper
- Dapo valve
- Bell vibration dampers

Technical characteristics

kW

1,1

Voltage

3PH

Current (A)

2,4

Polarity or No. turns at 1'

Poles 2

Type of controller

QE CEREBRO/EASY

Dimensions

Centrifugal Gf Quote
B x D x H (mm)

649X458X625

Mouth Pressing base "b"

185

Mouth Pressing height "h"

298

Air passage "D" diameter mm

255

Flange "D1" hole spacing mm

292

External flange "D2" diameter mm

325

Weight KG

42

CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding.

The reported data meet the following parameters:

  • - Tolerance on flow rate ±5%
  • - Noise tolerance +3dB(A)
  • - Air temperature 15°C
  • - Barometric pressure 760 mm Hg
  • - Air specific gravity 1.226 kg/m³
  • - Frequency 50 Hz

Sound pressure level was measured by omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards.

Can't find what you're looking for?

Products
Cta Aspirator