The EQ series is ideal wherever it is necessary to move large volumes of air with low heads with wall and/or panel applications, for ventilation farms, parking lots, electrical equipment, etc. Operating temperature : -25°/+40°
Square frame with large suction radius protected against weathering
Impeller with high-efficiency airfoil blades and stationary variable-setting angle, made of high-strength technopolymer and cast aluminum hub
Steel wire motor-side safety net protected against weathering, made according to UNI EN 294 standard
Static and dynamic balancing according to UNI/ISO 1940/BS 6861 - 1 standard
Three-phase or single-phase asynchronous motor, EEF 1 and 2 efficiency, suitable for operation by speed regulation, IP 55 protection, class F insulation, S1 service, execution 5, conforms to IEC/EEC specifications (UNEL-MEC)
Air flow from motor to impeller
Supply voltage
single-phase Volt 230 Hz 50
three-phase Volts 230/400 Hz 50
Clean non-abrasive ducted air
Accessories
Cerebro and/or Easy series switchboard
Speed controller (single phase)
Impeller side safety net
Gravity damper
Spacer
On request:
Reverse air flow (impeller to motor)
Version with aluminum impeller
Atex-certified version for potentially explosive environments
Technical characteristics
kW
0,18
Voltage
3PH
Current (A)
0,6
Polarity or No. turns at 1'
4
Type of controller
QE Cerebro/Easy
1PH Regulator
Dimensions
B x D x H (mm)
500X500X320
Hole spacing "B x B" (mm)
450X450
No. of holes x mm
NO.4X10MM
Air passage "D" diameter mm
410
Weight KG
9
CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding.
The reported data meet the following parameters:
- Tolerance on flow rate ±5%
- Noise tolerance +3dB(A)
- Air temperature 15°C
- Barometric pressure 760 mm Hg
- Air specific gravity 1.226 kg/m³
- Frequency 50 Hz
Sound pressure level was measured by omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards.
Data Sheet
MAIN FEATURES
TECHNICAL FEATURES
DIMENSIONS
Accessories
"CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding. The data shown comply with the following parameters: Flow rate tolerance ±5% | Noise tolerance +3dB(A) | Air temperature 15°C | Barometric pressure 760 mm Hg | Air specific gravity 1.226 Kg/m³ | Frequency 50 Hz The sound pressure level was measured with omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards."
Square frame with large suction radius protected against weathering
Impeller with high-efficiency airfoil blades and stationary variable-setting angle, made of high-strength technopolymer and cast aluminum hub
Steel wire motor-side safety net protected against weathering, made according to UNI EN 294 standard
Static and dynamic balancing according to UNI/ISO 1940/BS 6861 - 1 standard
Three-phase or single-phase asynchronous motor, EEF 1 and 2 efficiency, suitable for operation by speed regulation, IP 55 protection, class F insulation, S1 service, execution 5, conforms to IEC/EEC specifications (UNEL-MEC)
Air flow from motor to impeller
Supply voltage
single-phase Volt 230 Hz 50
three-phase Volts 230/400 Hz 50
Clean non-abrasive ducted air
The EQ series is ideal wherever it is necessary to move large volumes of air with low heads with wall and/or panel applications, for ventilation farms, parking lots, electrical equipment, etc. Operating temperature : -25°/+40°
Cerebro and/or Easy series switchboard
Speed controller (single phase)
Impeller side safety net
Gravity damper
Spacer
On request:
Reverse air flow (impeller to motor)
Version with aluminum impeller
Atex-certified version for potentially explosive environments
