DOUBLE INTAKE TRANSMISSION FAN

DAT 10/10

The DAT series is of the centrifugal double suction transmission type with forward blade impeller

Data sheet

Key Features

Prepared for IEC standard motor mounting by belts/pulleys. The temperature of the conveyed fluid must not exceed 40° C.

Technical characteristics

kW

0,37

Voltage

3PH

Current (A)

1,1

Polarity or No. turns at 1'

600

Type of controller

QE Cerebro / Easy

Dimensions

B x D x H (mm)

421X248X454

Mouth Pressing base "b"

331

Mouth Pressing height "h"

289

Shaft diameter "d" mm

20

Weight KG

20

CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding.

The reported data meet the following parameters:

  • - Tolerance on flow rate ±5%
  • - Noise tolerance +3dB(A)
  • - Air temperature 15°C
  • - Barometric pressure 760 mm Hg
  • - Air specific gravity 1.226 kg/m³
  • - Frequency 50 Hz

Sound pressure level was measured by omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards.

Can't find what you're looking for?

Cta Aspirator