BOX APHONIC CASTLE

C900

The CASTLE series is particularly suitable for all suction systems where very low sound levels are required in the use of centrifugal single inlet fans.

- Suitable for conveying clean air or conveying suspended materials at a maximum temperature of 60°C.
- Hot gas execution on request

Data sheet

Key Features

  • Suction and pressurizing vibration damping joints (dumpster NOT under vacuum for maintaining internal cleanliness)
  • Maximum temperature of the fluid sucked in -10°C / +60°C centrifuged with environmental 40°C max. (Special designs on request)

Accessories

  • Cerebro and/or Easy series switchboard
  • Filtered cartridge silencers
  • Suction and discharge protection nets

Dimensions

B x D x H (mm)

2950X2400X2750

Weight KG

1300

CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding.

The reported data meet the following parameters:

  • - Tolerance on flow rate ±5%
  • - Noise tolerance +3dB(A)
  • - Air temperature 15°C
  • - Barometric pressure 760 mm Hg
  • - Air specific gravity 1.226 kg/m³
  • - Frequency 50 Hz

Sound pressure level was measured by omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards.

Can't find what you're looking for?

Cta Aspirator