MCT series fan boxes are equipped with centrifugal double inlet transmission fan. Mounted motors are asynchronous three-phase IEC V. 230/400 Hz 50 or V. 400/690 Hz 50 IP 55 CLASS F. Dual polarity 4/6 Poles motors (1,400 - 900 RPM) are available on request. The temperature of the conveyed fluid must not exceed 40°C.
The MCT series consists of the MCD elements with the addition of:
Extruded aluminum frame with fiberglass or cast aluminum corners
Panels made of polyurethane foam sheets with external - internal coating consisting of embossed aluminum films
Fully recyclable internal aphonization made of thermobonded polyester fibers with reaction to fire "Class 1 (UNI 9177:1987) Euroclass B s1 d0" and smoke "F1 (AFNOR NF F16-101:1988)" certified with 20 mm thick aluminum protective foil
Engine side inspection hatch
Fan attached to the pressure port with gaskets
vibration dampers and by means of vibrostops on the feet
Base and counter-base with interposed
vibrostop
Belt tensioner slides
Transmission with V-belts and pulleys
Steel panels
Accessories
Cerebro and/or Easy series switchboard
Speed controller (single phase)
Galvanized sheet metal rain canopy
Wolf's mouth with anti-volatile net on presser
Engine side inspection hatch
Supporting feet
Polished Stainless Steel Panels
Standard dimensions can be varied by customer order and design
Technical characteristics
kW
0,55
Voltage
3PH
Current (A)
1,42
Polarity or No. turns at 1'
1030
Type of controller
QE Cerebro / Easy
Dimensions
B x D x H (mm)
660x900x660
Mouth Pressing base "b"
331
Mouth Pressing height "h"
289
Weight KG
83
CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding.
The reported data meet the following parameters:
- Tolerance on flow rate ±5%
- Noise tolerance +3dB(A)
- Air temperature 15°C
- Barometric pressure 760 mm Hg
- Air specific gravity 1.226 kg/m³
- Frequency 50 Hz
Sound pressure level was measured by omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards.
Data Sheet
MAIN FEATURES
TECHNICAL FEATURES
DIMENSIONS
Accessories
"CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding. The data shown comply with the following parameters: Flow rate tolerance ±5% | Noise tolerance +3dB(A) | Air temperature 15°C | Barometric pressure 760 mm Hg | Air specific gravity 1.226 Kg/m³ | Frequency 50 Hz The sound pressure level was measured with omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards."
APHONIC BOX MINI CASTLE DOUBLE SUCTION TRANSMISSION
The MCT series consists of the MCD elements with the addition of:
Extruded aluminum frame with fiberglass or cast aluminum corners
Panels made of polyurethane foam sheets with external - internal coating consisting of embossed aluminum films
Fully recyclable internal aphonization made of thermobonded polyester fibers with reaction to fire "Class 1 (UNI 9177:1987) Euroclass B s1 d0" and smoke "F1 (AFNOR NF F16-101:1988)" certified with 20 mm thick aluminum protective foil
Engine side inspection hatch
Fan attached to the pressure port with gaskets
vibration dampers and by means of vibrostops on the feet
Base and counter-base with interposed
vibrostop
Belt tensioner slides
Transmission with V-belts and pulleys
Steel panels
MCT series fan boxes are equipped with centrifugal double inlet transmission fan. Mounted motors are asynchronous three-phase IEC V. 230/400 Hz 50 or V. 400/690 Hz 50 IP 55 CLASS F. Dual polarity 4/6 Poles motors (1,400 - 900 RPM) are available on request. The temperature of the conveyed fluid must not exceed 40°C.
Cerebro and/or Easy series switchboard
Speed controller (single phase)
Galvanized sheet metal rain canopy
Wolf's mouth with anti-volatile net on presser
Engine side inspection hatch
Supporting feet
Polished Stainless Steel Panels
Standard dimensions can be varied by customer order and design
