The ED (short case) and EI (long case) series are ideal for applications where large volumes of air with low heads are needed, for suction of fumes, dusty or humid air, in foundries, cement factories, paper mills, in shipbuilding, for heat exchangers, etc. Operating temperature : -25°/+40°
Drum made of sheet steel painted with baked epoxy-polyester powders
Impeller with high-efficiency airfoil and stationary variable shrinkage angle, made of cast aluminum or technopolymer with cast aluminum hub
Static and dynamic balancing according to UNI/ISO 1940/BS 6861-1 standard
Three-phase or single-phase asynchronous motor, EEF 1 and 2 efficiency, also suitable for operation by speed regulation, IP 55 protection class F insulation, complies with IEC/EEC specifications
Flanges made according to UNI ISO 6580 / EUROVENT 1-2 standard
Versions
ED: short case
EI: long case
EDC: double counter-rotating stage
By request
Version with AISI stainless steel drum.
Version with aluminum drum
Version with motor and impeller for fire-fighting operation 400 °C/ 2h certified
Atex-certified version for potentially explosive environments
Reverse airflow version (impeller-motor)
Accessories
Cerebro and/or Easy series switchboard
Speed controller (single phase)
Counterflange
Suction mouthpiece
Anti-vibration mounts
Safety nets
External terminal block
Fixing feet
Technical characteristics
kW
1,5
Voltage
3PH
Current (A)
3,7
Polarity or No. turns at 1'
6
Type of controller
QE Cerebro / Easy
Dimensions
Air passage "D" diameter mm
810
Flange "D1" hole spacing mm
860
External flange "D2" diameter mm
905
Weight KG
110
CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding.
The reported data meet the following parameters:
- Tolerance on flow rate ±5%
- Noise tolerance +3dB(A)
- Air temperature 15°C
- Barometric pressure 760 mm Hg
- Air specific gravity 1.226 kg/m³
- Frequency 50 Hz
Sound pressure level was measured by omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards.
Data Sheet
MAIN FEATURES
TECHNICAL FEATURES
DIMENSIONS
Accessories
"CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding. The data shown comply with the following parameters: Flow rate tolerance ±5% | Noise tolerance +3dB(A) | Air temperature 15°C | Barometric pressure 760 mm Hg | Air specific gravity 1.226 Kg/m³ | Frequency 50 Hz The sound pressure level was measured with omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards."
Drum made of sheet steel painted with baked epoxy-polyester powders
Impeller with high-efficiency airfoil and stationary variable shrinkage angle, made of cast aluminum or technopolymer with cast aluminum hub
Static and dynamic balancing according to UNI/ISO 1940/BS 6861-1 standard
Three-phase or single-phase asynchronous motor, EEF 1 and 2 efficiency, also suitable for operation by speed regulation, IP 55 protection class F insulation, complies with IEC/EEC specifications
Flanges made according to UNI ISO 6580 / EUROVENT 1-2 standard
Versions
ED: short case
EI: long case
EDC: double counter-rotating stage
By request
Version with AISI stainless steel drum.
Version with aluminum drum
Version with motor and impeller for fire-fighting operation 400 °C/ 2h certified
Atex-certified version for potentially explosive environments
Reverse airflow version (impeller-motor)
The ED (short case) and EI (long case) series are ideal for applications where large volumes of air with low heads are needed, for suction of fumes, dusty or humid air, in foundries, cement factories, paper mills, in shipbuilding, for heat exchangers, etc. Operating temperature : -25°/+40°
