The CASTLE series is particularly suitable for all suction systems where very low sound levels are required in the use of centrifugal single inlet fans.
- Suitable for conveying clean air or conveying suspended materials at a maximum temperature of 60°C. - Hot gas execution on request
Suction and pressurizing vibration damping joints (dumpster NOT under vacuum for maintaining internal cleanliness)
Maximum temperature of the fluid sucked in -10°C / +60°C centrifuged with environmental 40°C max. (Special designs on request)
Accessories
Cerebro and/or Easy series switchboard
Filtered cartridge silencers
Suction and discharge protection nets
Dimensions
B x D x H (mm)
2950X2400X2750
Weight KG
1300
CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding.
The reported data meet the following parameters:
- Tolerance on flow rate ±5%
- Noise tolerance +3dB(A)
- Air temperature 15°C
- Barometric pressure 760 mm Hg
- Air specific gravity 1.226 kg/m³
- Frequency 50 Hz
Sound pressure level was measured by omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards.
Data Sheet
MAIN FEATURES
TECHNICAL FEATURES
DIMENSIONS
Accessories
"CIMI Srl reserves the right to change dimensional dimensions and/or performance for improvements or range changes without what is on the site being binding. The data shown comply with the following parameters: Flow rate tolerance ±5% | Noise tolerance +3dB(A) | Air temperature 15°C | Barometric pressure 760 mm Hg | Air specific gravity 1.226 Kg/m³ | Frequency 50 Hz The sound pressure level was measured with omnidirectional free-field measurement at 1.5 or 3 m (depending on the product) from the fan with ducted inlet, tolerances, performance points and environments according to European standards."
Suction and pressurizing vibration damping joints (dumpster NOT under vacuum for maintaining internal cleanliness)
Maximum temperature of the fluid sucked in -10°C / +60°C centrifuged with environmental 40°C max. (Special designs on request)
The CASTLE series is particularly suitable for all suction systems where very low sound levels are required in the use of centrifugal single inlet fans.
- Suitable for conveying clean air or conveying suspended materials at a maximum temperature of 60°C. - Hot gas execution on request
